16-38HXL Lawn Tractor

※ Download: Toro 16- 38 hxl service manual

It is 25 mb so it may take a while. Posts are for general information, are not intended to substitute for informed professional advice medical, legal, veterinary, financial, etc. If that all makes sense, does anyone know if there is a way to reduce tension on the mower belt about an inch or so? Click on this and it will bring up another page with a box to enter the model number.

You can look through the fins on the right side of the tower and see which hole it is in. Posts are for general information, are not intended to substitute for informed professional advice medical, legal, veterinary, financial, etc.

16-38HXL Lawn Tractor - Tipp: , damit Sie diesen Vorgang nicht auf allen Geräten einzeln durchführen müssen. If that all makes sense, does anyone know if there is a way to reduce tension on the mower belt about an inch or so?

On most riding mowers there are several switches that must be actuated before it will start. First, make sure that blades are disengaged. Also, if there is a handle that engages and disengages the blades, you might try holding it in the dis-engage position msnual case the switch is out of adjustment. There is probably one under the seat also. This switch kills everything if you are not sitting in the seat for safety reasons. The switch here could be out of adjustment or mis-positioned. Also, make sure the parking brake is set, and the gear is in neutral, and not forward or reverse. Also, even if the parking brake is set, you might try pressing the brake all the way down while starting, as this switch might be out of adjustment. All of zervice switches should be easy to locate and adjust. Also, you should check the battery. It is possible that you left the key on by mistake and drained it. Hope some of this helps.

Toro Wheel Horse drive belt diagram model 71227 16 38HXL
I happen to have one that seemed to be the correct sizer in the shed and put it on. Go to the hydro drive belt section and it should have the picture to show you in detail. One way to get more slack in the belt is to put the engagement cable hook in the lower hole on the engagement arm, if it isn't there already. You can look through the fins on the right side of the tower and see which hole it is in. Posts are for general information, are not intended to substitute for informed professional advice medical, legal, veterinary, financial, etc. It will bring up another page.